Blake Printing Supply Remanufactured Ink Cartridges Replacement for Epson 127 (2x Black, 2x Cyan, 2x Magenta, 2x Yellow, 8-Pack)

Blake Printing Supply Remanufactured Ink Cartridges Replacement for Epson 127 (2x Black, 2x Cyan, 2x Magenta, 2x Yellow, 8-Pack)..

GET Blake Printing Supply Remanufactured Ink Cartridges Replacement for Epson 127 (2x Black, 2x Cyan, 2x Magenta, 2x Yellow, 8-Pack) By Blake Printing Supply

Most helpful customer reviews

24 of 24 people found the following review helpful.
Works with Epson WF-3450
By tnjgray
Update: 5/2/13 Reman Cyan and Magenta cartridges are still working. Ink status page still indicates both are full. Print quality is still good. I like these cartridges. Will install and test the reman black cartridge soon and post an update when I do.

Arrived promptly. Replaced the Cyan and Magenta cartridges in my Epson WF-3450. Initialized and recognized the new (reman) cartridges right away. Both ink levels indicate full on the diagnostic page. I don't know how long the ink will last compared to new Epson cartridges, but they are working well and I haven't noticed any difference in print quality yet. So far so good and I'm happy with the reman cartridge purchase. I will update this review accordingly.

22 of 24 people found the following review helpful.
These are fantastic - a great savings over the name brand!
By Loren Malm
These cartridges saved me a lot of money over the "name brand" from Epson and we will be ordering again. I am glad I ordered the option with two sets. Although one of the cartridge did not work (one of the blue ones gave an error as an invalid cartridge no matter what I did) the other blue cartridge did, so I was up-and-running quickly.

Other than the issue with the one blue cartridge I would rate the cartridges very high. Easily as good or better than the ones that came with the printer.

One tip that may or may not be obvious: There is a tear-off strip on top of the cartridge which must be removed - this is a little confusing because the top part of the same label cautions that it not be removed. So you do have to tear off the bottom part of the label but must not tear off the top part - this is easily done but perhaps not obvious.

The "chip" worked well except for the issue with the first blue one described above. Regardless of the issue with the first blue one, the savings are tremendous - you could buy eight sets of these cartridges (eight!) for the cost of one of the name-brand Epson sets.

Will buy again!

UPDATE: Just got an e-mail from Blake Printing Supply - they read my review and already shipped a new blue one UPS. Can't beat that! Five star recommendation for Blake Printing Supply!

15 of 16 people found the following review helpful.
My Printer Didn't Recognize
By Brad E.
I have a WF-3540 and purchased this ink thinking I could save some money from the ridiculously high prices the name brand ink charges. My printer wouldn't recognize the new cartridge (black) and after going round and round trying to get it to work I broke down and popped in a name-brand cartridge and everything worked great. I'm not sure if the printer itself was thwarting the use of off-brand ink or what but pretty disappointed. I'm going to try it with one of the color replacements I received once the name brand ones run out and we'll see what happens; so far it's been frustrating.

See all 433 customer reviews...More...

DJI Phantom Aerial UAV Drone Quadcopter Replacement Battery

DJI Phantom Aerial UAV Drone Quadcopter Replacement Battery..

GET DJI Phantom Aerial UAV Drone Quadcopter Replacement Battery By DJI

Most helpful customer reviews

25 of 26 people found the following review helpful.
Only a 1C charge rate -- there are better options
By Kirby Miller
These are identical to the one that came with the Phantom. I bought three more before I realized there were better options. If you are using the standard (SLOW) charger that came with the Phantom and don't mind waiting so long for a charge then these are fine.

Otherwise I strongly recommend the Hyperion batteries (specifically made for the Phantom). Those will charge at a rate of 6C !!! and are also 2500mA (more capacity than this 2200mA battery). They can also be charged with your standard charger until you can get something better. I use a Dynamite Prophet charger and charge 4 of the Hyperions at once at 8 amps each! That means 4 2500mA batteries charged, balanced, and ready to fly in about 30 minutes. That charger is pretty pricey, about $265 but worth it if you use it a lot.

The Hyperion batteries are only about $35 each but I don't think Amazon sells them. Not sure. I got those at a local hobby store. I don't use these standard Phantom batteries any more. I just keep them as extras if I go on a trip.

________________________________

UPDATE:

Actually all the Hyperions I have bought are now puffed (some after only one or two uses). I am definitely not overcharging them, or over-draining them. Only thing I can figure is that I have stored them fully charged, which I know you are not supposed to do, but sometimes I charge all my batteries, go out on a trip and only end up using one or two batteries. I'm not going to discharge all the batteries when I get home. I just don't have time to deal with that. And all my original DJI batteries are stored exactly the same way (fully charged) and still function as new so I have gone back to those for now. Definitely looking (again) for something better but not so sensitive to being stored at exactly the right voltage.

4 of 4 people found the following review helpful.
will do but has a low charge rating & high priced
By An Engineer
There are better yet cheaper options its a matter of looking at the specifications. To find a match we must look at ...

* 3 cell LiPo requirement
* 2200 mah at least
* 20c discharge rating at least
* XT60 connector
* same size and weight

Here is one that will do the trick and has a faster charge rate of 2C. No modifications and a direct fit for around $20:
Turnigy 2200mAh 3S 20C Lipo Pack HobbyKing RC Battery

A faster charger would also be important, one that can support a 2C ratting which means one that can support 2C x 2200mah = 4.4 amps like this one:
Fast LiPo Battery Balance Charger - 40 Watt - 4.5 Amp - 1 2 3 or 4 cell batteries - Connectors included for the DJI Phantom

or if you have a need to charge multiple batteries at the same time check out this charging station:
40 watt fast LiPo battery balance chargers (x5) with carrying case for the DJI Phantom batteries

Happy Shopping!

2 of 2 people found the following review helpful.
great for my Phantom
By Jeremy
I bought 6 of these and they've performed wonderfully. I get about 8 minute flights consistently and am quite happy with them

See all 99 customer reviews...More...

Mitsubishi 915B403001 Replacement Lamp w/Housing 6,000 Hour Life

Mitsubishi 915B403001 Replacement Lamp w/Housing 6,000 Hour Life..

Grab Now Mitsubishi 915B403001 Replacement Lamp w/Housing 6,000 Hour Life By

Most helpful customer reviews

72 of 75 people found the following review helpful.
Super Easy Installation, TV looks like brand new picture
By Sean B
This lamp and housing arrived yesterday while I was at work. I told my wife I would install it when I got home. Turns out, she couldn't wait and had the old piece removed, the new item installed, and the TV working good as new when I showed up. She said it was as easy as loosening 3 screws on the access panel, removing the old housing, and plugging in the new.

I was a little leery about purchasing this item after reading reviews from other sellers of similar products. Horror stories of new/replacement bulbs burning out after a couple days or even just a few hours were plentiful. What sold me on this specific item, besides the great price, was the 1-year warranty.

Believe me, I will update this review the minute I have problems. For now, though, it's like having a brand new TV.

--- Sept 15, 2013 - UPDATE ---
Well, it has been 18 months and the bulb just went out in the middle of Sunday Night Football...somewhat spectacularly this time...with a loud pop. So the original bulb that came with the Mitsu TV lasted 3.5 years. I see I could pay $130 for an OEM replacement and hopefully get 3-4 years out of it. Or pay approximately $40 and get 1.5 years with the non-OEM brand. (I'm gonna buy 3 of these cheap ones and have a couple spares).

Hope this helps you all.

53 of 57 people found the following review helpful.
Bad Lamp...Great Support
By rdmcc
1. DO YOUR REASEARCH! Read the reviews from other buyers of this Lamp. I received the lamp very quickly from Bulb World. Installed it per instruction and 9 days later the lamp blew. And I mean blew. It sounded like a gunshot went off right behind the TV. After letting the lamp cool down, I pulled it and the center insulator that the filament runs through had literally exploded. There was even molten glass that found its way out of the lamp housing. After closer inspection of the replacement lamp and the orginal lamp (which lasted me just over 4 years, by the way) I noticed the replacement lamp was missing the little gray metal piece that seems to direct cool air flow over the center insulator/filament. Not sure if this is the cause of failure but, buyer beware.

Needless to say I pryed my wallet open and went direct to Mitsubishi Electraonics parts department and ordered a factory oem (non-refurbished) lamp. Granted it did cost twice as much as this one but, when I received it and compared it to the original, I found zero differences between the two. This lamp has been running for about 2 weeks now, now problems so far...knock on wood.

If you read the reviews, you will see that very few people submitted negative reviews for the "ShopJimmy" replacement lamp. Needless to say, I took the chance and may have gotten one of the few bad ones. Who knows. For that reason I gave the replacement lamp 1-star. I will however give Bulb World 5-stars for their customer service. They provided me with a full refund upon return of the bad lamp, no questions asked. They do stand by the 1 year warranty. Good job Bulb World.

22 of 23 people found the following review helpful.
great
By Barca 1
This was the first time i ever had to buy a replacement lamp and amazon was the cheapest place I found the parts. it was easy to replace an my tv started working the way it was working when I first purchased. so I would recommend buy replacement lamps for your tv from amazon and I got it deliver home within 3 to 5 days. Overall I am a very satisfied customer.

See all 748 customer reviews...More...

Iphone 5 Replacement battery. Original quality. Full original capacity 1440 mAH. APN 616-0610

Iphone 5 Replacement battery. Original quality. Full original capacity 1440 mAH. APN 616-0610..

Special Price Iphone 5 Replacement battery. Original quality. Full original capacity 1440 mAH. APN 616-0610 By TechAhead

Most helpful customer reviews

153 of 182 people found the following review helpful.
"Jewelers" is the WRONG word to use for a nice set!
By GaryTucson
I'm giving this set 3 stars because the wrong word was used to sell it. First, this is a VERY nice set of high quality drivers for a ridiculously low price! Unlike so many crap Chinese knock-offs, Stanley tools are almost always great quality. This set is no exception. BUT, I can't imagine why they're trying to sell it as a "jewelers" set because even the smallest phillips and regular-head drivers in this set will NOT work to remove screw-in links from ANY band I have EVER tried them on or ANY of the caseback screws on ANY of my watches. Even the smallest of the heads in this set are WAY to big to use for ANY precision watch repair.

That said, it IS a VERY nice set of high quality drivers to buy for small electronics, glasses and other things that require smaller screw drivers than normal. This is NOT a "Jewelers Precision Screwdriver Set"!!!!!!!!

42 of 48 people found the following review helpful.
Phillips heads are not small enough
By A Customer
I have some electronic equipment I was trying to disassemble, and I was disappointed that the phillips heads were not "precise" enough. The set should be adequate for most purposes, but if you are looking for very small phillips heads, they aren't here. But to be fair, I don't think other offerings are any better.

26 of 31 people found the following review helpful.
13 pc Set Recvd, and it worked
By Twoboxer
Overall, the set gets 5 stars because it contained (more than) the parts advertised, and it worked for the intended purpose - the #5 torq driver opened the battery compartment on a Philips Pronto 9400 remote control. Quality? The 13 pieces cost $10. At that price, the quality is *at least* as expected.

Note that the set I received on 1/6/12 had 13 pieces:
- 7 Torq drivers and 2 tweezers as shown.
- 1 plastic prying tool, double-ended, green.
- 1 flat + 1 philps head "jeweler's" screwdrivers, black plastic-like.
- 1 unidentifed piece, a screwdriver-like piece I would describe as a "jeweler's size" awl.

The set came in a re-sealable plastic bag, inside a small bubble-mailer, inside an Amazon box. The bag+mailer are adequate as a storage pouch.

See all 604 customer reviews...More...

For Apple Iphone 4 4g (AT&T) Black Screen Glass Replacement Digitizer with Frame + LCD Assembly + 6 Piece Tool Kit

For Apple Iphone 4 4g (AT&T) Black Screen Glass Replacement Digitizer with Frame + LCD Assembly + 6 Piece Tool Kit..

GET For Apple Iphone 4 4g (AT&T) Black Screen Glass Replacement Digitizer with Frame + LCD Assembly + 6 Piece Tool Kit By Gemeric

Most helpful customer reviews

184 of 198 people found the following review helpful.
Looks, feels, works great
By Apple user
This screen is the same type of high def screen that the iPhone 4 comes with. You cant see pixels. It's the same.
If you compare it to an iPhone screen you can see that the whites are slightly different but you can't tell if you just look at the phone by itself.
The glass seems the same to me. I see reviews that say their is a different feel to the glass. I held both in my hands and I can't see much of a difference. I can't feel much of a difference. I was worried their would be. Don't worry about it.
This is a great price and a perfect replacement. Buy it. It looks and feels perfect. I'm very happy with it.
The replacement is easy if you use the youtube video and use a magnetic tray that you draw on. There are 7 or 8 different types of screws. Make it easy on yourself to know where they go. I drew a large version of the phone and placed the screws where I found them in the phone. Made it easy.

I did about 3 hours of research on iPhone 4 replacement screens. What I learned.
- Don't buy a touch screen only. It wont work. You need the screen and lcd display.
- Nobody has a OEM screen. Their are close copies but if you want an Apple screen you need to return you screen to Apple. This screen is the same as you will get from the video making websites that sell them for $100
- Some screens out there have plastic screens. They scratch. Don't buy them.
- When they changed the screw in the bottom of the iphone they didn't send the correct screw driver for a while. They send the correct screw driver now.
- Many people don't know that you need to use the phone speaker screen that your phone comes with. This screen doesn't come with one because you already have one.

200 of 245 people found the following review helpful.
POOR QUALITY
By joan p
I own a small electronics repair business, and focus largely on smartphone repair. I order thousands of dollars a month in parts for phones and laptops, so I see a lot product through my office.
These are easily the worst screens I've seen. I order 6 of them at the same time and I had issues each one. It's natural that aftermarket screens won't fit as well as the original Apple screen, that is expected, but these are usable for me. First, they are too thick, forcing me to use a filler under the home button to bring it to screen level, second, the margins around the screen are off, covering the entire aluminium casing. Third, the plastic bezel surrounding the glass digitizer isn't properly adhered to the glass causing it to come loose and prevent the digitizer from seating to the case well.
In addition to the build of these parts, several of the screens didn't work at all. One had a bad LCD and another had a cut ribbon cable. There are several other options for this screen from other sellers that are much better quality and about the same price. I for one, will never buy a product from this seller again if I can avoid it.

135 of 171 people found the following review helpful.
Read this review before you buy!
By Seth F.
This item arrived quickly and went together ok but there were three serious issues I experienced:

1.) Unit had no instructions--which is fine because I followed a Youtube video; however, it would have been helpful if a note/link to the exact Youtube video was included as described below.

2.) Unit DOESN'T come with a wire mesh piece that attaches underneath the front glass plate (where you put your ear). Consequently I now have a hole in the face of my iPhone through which i can see the inside circuitboard, etc. At this point, I shouldn't use my iphone at the gym or in the rain because water can enter the phone. I started to repair this by taking it apart to use the grill from my old cracked glass, but I stripped the screws holding the glass to the steel outer casing with the provided screwdriver and could not get it apart again.

3.) Company provided all the necessary tools; however, the task would have been an order of magnitude easier with a MAGNETIC phillips head screwdriver since the screws holding the innards of the iphone 4 together are tiny, to say the least.

I WOULD buy this again, but I would make sure to find a Youtube video showing assembly/dissasembly specifically for "buyiparts" and I would purchase my own micro sized MAGNETIC "watch repair" screwdriver.

See all 750 customer reviews...More...