DataComm 45-0001-WH 1-Gang Recessed Low Voltage Cable Plate (White)..
GET DataComm 45-0001-WH 1-Gang Recessed Low Voltage Cable Plate (White) By DataComm Electronics
Most helpful customer reviews
90 of 93 people found the following review helpful.
By Cement Phantom
I mounted a TV on the wall of my kitchen and was looking for an inexpensive way to hide the wires. This is ideal.
It's simple to install. You just need two of these and two low voltage brackets like this: Arlington LV1-1CS Single Gang Low Voltage Mounting Bracket Device You use a stud finder to make sure you're not looking to put this in a stud, and then use a drywall saw to cut the hole. Repeat to put the one down below. (Use a level to ensure they're straight.) Insert the low voltage mounting bracket in both the upper and lower and then put the plate on the upper one. Start fishing cables through the wall. (It's easier to leave the plate off the lower one until you fish all the wires out of the wall first.)
Through a one-gang plate, I have an HDMI cable, a VGA cable, a set of composite cables with sound, a 1/8" headphone jack cable, and a network cable. It's tight, but everything fits.
Order these plates. You won't be disappointed.
41 of 43 people found the following review helpful.
By Gabesdaddee
This is a great product! But if you are running a lot of wires, like I did, then I recommend you buy the double gang plate. I ran my surround sound(12 gauge), 3 HDMI cables, 1 TOS link, 1 coax, and 1 Cat 6 cable and barely had enough room.
Someone mentioned that you cannot do this without having back access or a new build. That is false. Just need to take your time when cutting the wall and boring through the studs.
48 of 52 people found the following review helpful.
By cvyoung
This is a simple cover plate for a wall hole that provides a neat, orderly way to feed cables from your Home Theater system into the wall, or out of the wall at the TV Monitor location. It lets you buy one, long set of cables, rather than one set for inside the wall and two patch sets for home theater receiver to the wall, and wall to TV monitor. If you have more than one type of connection, this will make your install much less expensive!
Things to know:
1. You will need TWO, if you are going to use a single set of cables!
2. You will need a old-work, low-power wall box for each one purchased. You can get these for $1-3 each (depending on style) at your local "Big-Box" hardware store. (Check both the electrical area and the home networking areas to find both styles.)
3. When planning your installation, recognize that the clump of wires coming out of the wall will not make many wives happy! Plan to have both boxes hidden by the TV or Home theater cabinet.
4. If moving connections horzintally from one wall location to another, you are likely to run into one or more studs. If you do not have experience with blind drilling large holes, you will be much happier taking the cables into the attic or crawl space in one stud space, and back into the wall at the new stud space.
Tidak ada komentar:
Posting Komentar