Amazon Kindle Fire HD 8.9" Standing Leather Case, Royal Purple (will not fit HDX models)..
GET Amazon Kindle Fire HD 8.9" Standing Leather Case, Royal Purple (will not fit HDX models) By Amazon
Most helpful customer reviews
1301 of 1375 people found the following review helpful.
By Rick Mallory Jr.
So I've had over a week now to spend some time with both my Kindle Fire HD 8.9" and this particular leather case and I have to say, I honestly do not understand why it received so many negative reviews. However, that's not to say that this case doesn't have some issues (some more obvious than others).
Durability (5/5): You know, part of me wanted to make a video review showing me hurling this case straight down onto pavement. Could I do it? Sure! Do I think the Kindle would hold up if it were inside the case while I conducted this experiment? Yes. The reason why I didn't though is because I can only imagine how many people would cringe at the idea of looking at such a scene. Plus, while I am confident in the strength of the case, I'd rather be safe than sorry in this particular matter. Still, it does feel quite sturdy and I suppose the reason why people say (in other reviews) that it "feels cheap" is probably because it is so thin (which in my opinion is a good thing). If you're gonna spend this kind of money on a tablet AND get a bulky case for it, then why not just get a laptop at the same cost?
Weight (5/5): One thing that this case has going for it, is that it doesn't add too much weight to the Fire HD. As far as I'm concerned, it's at just the right weight for me to hold up with one hand (or at the very least two hands) for a decent amount of time. So overall, weight is not an issue here and this is a good thing!
Stand: (5/5): I've just recently had new hard wood floor installed in my house and so I was eager too test out the stand on different surfaces. I tried plastic surfaces, slick hard wood surfaces, suede surfaces, a memory foam mattress, and my own belly (just to name a few). I've yet to have an issue with the case sliding or toppling out of place. So I'm a bit confused at some of the reviews that state the stand "doesn't work." Maybe I got a lucky unit, but as far as I've gathered, it does it's job for me.
Design (4/5): Alright, I like the way it looks, it fits very well and is very slim (as I stated earlier), however it does have one flaw (that may not pertain to some of you). I happen to have a cat, so sometimes stray hairs can hover or linger in the air here and there. What does this have to do with anything? Well when you open up the case, the interior is made of some sort of material that tends to "cling" to hairs. This would be alright except for the fact that when you close the case, this material touches the screen. So the next time you open it, you may be welcomed with a hair or a crumb, or something of that nature. Just a simple wiping would do, but it's just something to point out (as I haven't seen any other reviews make note of this). Aside from that, everything is fine. I love how when the cases closes it's magnetic and automatically turns the Fire HD off when closed and on when opened. The only other issue I should discuss is that (and others have already pointed this out) when plugged in, the case is designed so that the cord comes out on the bottom. So if you're using the stand feature, it can get kinda weird, however I've actually noticed that this doesn't necessarily put a damper on the sturdiness of the case, in fact sometimes it adds extra balance. Overall, the design is very convenient.
Price: 3/5): This to me is the biggest flaw. I truly believe they could have faltered or lowered the price a bit for this product and maybe someday they will, however at the time of my purchase (and of this review) the asking price is a little steep. Do I think they could have sold this cheaper? Yes? Am I upset that I paid this much for it? No. After having spent some time with it, I am not enduring a feeling of "ugh...I wish I hadn't spent so much on this piece of crap." I'm pleased with the product and it does what it says and for that, it's worth the price, yet I wouldn't complain (and I'm sure neither would any of you) if they took it down a notch.
Overall (22/25)
I could have easily given this 5 stars instead of 4, however it's not necessarily a perfect product. Would I recommend it to Fire HD users though? Yes I would. The slimness and good fit alone are enough appeal for this product (as it sure beats some of the bulkier cases out there). I certainly hope that my review may help give you some insight, and if you have any questions, feel free to comment! Thank you for your time! :)
828 of 898 people found the following review helpful.
By Nobody
I don't think the cover seems cheaply made, nor have I had any trouble with the Fire falling over (I've used the stand only in the landscape orientation). I like the sleep/wake function built into the cover, the leather looks good, it adds very little weight to the Fire, there's no chemical smell, and the fit is snug without resorting to the use of corner straps or having to slip the Fire into a holder that covers the bezel. I like the cover so much I'm thinking of buying a second one in another color.
551 of 615 people found the following review helpful.
By DR-J-J
OK, I could have given this case 3 stars for some of the cons. I did not because of the way Amazon markets the case on their site probably clarifies what you are buying. The key here is THINNESS! And many people love a thin LIGHT case. Amazon designed this case to be the thinnest, and Amazon may very well have achieved that. I think this is a good thing. So good, that I have given this case 5 stars. Just know, you are buying thin.
5 stars for thin and protective case... about half an inch with the FireHD 8.9. (hard to measure, I need calipers!). I will tell you why I think some of the one star ratings are given...and they fall in two areas: One, the case looks cheap when you see the lower half inside. Two, the case can not be propped at a low angle to one's desk and still type well on it. We will look at both of these items... there are, I am sure, other reasons for low rankings, some due to perceptions of "a good case."
First, everyone has (perhaps) their own perceptions of what a good case is: My brother has a big Otterbox case (sturdy, shock resistant case) on his thin cell phone. I do not... I have a thin, easy to grip case. Why? Is it because I don't want my phone (and tablet) protected? Sure I do. But I am an adult, and I know how to take care of things. The case is there, just in case. :) But, I don't need to protect it to the level of an OtterBox case, in my view. So that is my preference. If this is not your preference, you are going to hate this thin, beautiful case.
Amazon advertises thin, and they deliver thin. And I agree with those who think if they wanted a one inch thick case around their tablet, they would have a netbook or similar, not a tablet (since tablets should be thin and light). But... but... but... (you may object)...
Yes, I know. This case doesn't look like a 50 bucks+ case. In fact, many have said it is not even leather. I don't know for certainty, but I don't doubt that it is leather. But let me describe the construction and you will see. And why does the bottom half look like it is just plastic!? Read on.
The case is a very light plastic shell... and this very thin shell can be seen on the inside of the lower half, so the perception is cheapness. But, the question should be, what is the purpose of this case and what is being accomplished by this plastic? In short, it is providing needed protection and absorbtion for drops around every square inch of the tablet... notice the complete wrap around, form-fitting shape on the bottom half. Look closely at the bottom half, which has been structured to fit the Fire HD 8.9 like a glove, with perfectly cut openings and stylish design), on the outside of this casing is a wrap around leather covering. Once your tablet is in this case, you never see the plastic, as it is holding your Fire HD 8.9. Then, on top of the shell is a thin, very thin, leather covering that looks like it has been steam fit and glued on top of the plastic. Then a black thread has sewn the edges down so I doubt it would ever come loose. By necessity then, the leather is not soft to the touch, since it is attached to a plastic shell. But, it is very likely leather and the reason some think it is all plastic is because of the shell material.
The sizing to the actual Kindle Fire HD is what is so amazing. The bottom of the plastic case just snaps over the bottom of the Fire and then the top lays on the glass of the tablet. Magnets (with Auto Wake and Sleep) keep the case shut (though it might not be good enough to stay shut in a fall).
THIN AND LIGHT?
Now, I purchased a Moko Case from Amazon too. It was thin, as was my preference. My Moko Case is about 5/8 of an inch with tablet). This case is 1/2 inch, plus maybe a tad more than half an inch. But, clearly, this case is thinnest of any case that I have seen.
Is it lightest? IT IS NOT. My Moco case is lighter, even though it is tad thicker. Why? This Amazon case wraps completely around the entire tablet (it doesn't leave any edges exposed. My Moco case does. Still, the slightly thicker padding on the Moco probably provides a bit more protection... but who knows... I am not going to drop test. :) Suffice it to say they are both thin and light weight. One a tad more than the other in each area.
THE STAND:
The stand on this case has been where many people have commented. Here is my take.
First, the stand does work well. It may not be the best if you like to type on your tablet in a standing mode (as finger pressure would certainly knock the stand over on some surfaces).
Remember thin? Well, one thing that makes many cases thicker is the stand mechanism. Make the stand (or base) too thick and it adds bulk. Make it too thin and it just doesn't stay up. So, this was the design challenge. Amazon went with a LACK OF A BASE for their stand.... as well as a lack of a Kick-0ut stand mechanism. How does it work? Simple, just fold it over and let the case form a A shape that supports the tablet to stand. Oh, I can hear it now. "That won't work reliably!" Well, what they did is make the outer edge side out of a sticky, rubbery material, so that when you prop it opens, it holds quite nicely. This saves them a lot of weight and thickness. Some don't like it... but I imagine it is people that want to type on the tablet with it propped up in standing position. I think that if the feet are kept fairly clean, they will grab onto any descent surface and hold the tablet upright... and at about any angle that you want.
I like this case. I like the design. I like the thinness. The jury still out on the stand (over time) and the magnetic closure (during a potential fall). I can't do less than five stars, because it does everything it states. Yes, I like my Moco case a bit better, but I bet this case will still be going strong long after my Moco case needs to be replaced. And now I have a wonderful replacement.
JJ
I will update this review over time.
Update: One con is the interior material of the case (the part that hits the screen)...it is not super-soft Micro-fiber cloth, rather a thin cloth that doesn't scratch the screen. A Microfber cloth interior might help keep the screen cleaner, but it would have added thickness. I have seen one reviewer say that cat hairs stick to it. I have not had that problem, and we do have a cat.
Update: Price vs. Quality. Boy, I really wanted to stay out of this discussion. Everyone has their own comfort level with price, so I just try to review the product. But yes, if you are looking at cases in the sub-20 market, this case is pricey in comparison. But, I doubt that anyone who wanted the features of this case, would then think the given price was too much to pay. Key features again?
Protective covering that covers the entire tablet
Connects to the tablet all the way around, so it isn't going to pop out.
Very thin (the thinnest?) and exceedingly light
Extremely easy to open, use, get access to all ports... and even easy to remove, if needed... all while being thin and attractive
Love the wonderful design for the volume rocker and power button. Nice design makes these a breeze to use (unlike my cell phone case).
Leather coating (though not soft) seems durable and easy to grip.
Speaker vents are perhaps the best I have seen on any case... it doesn't limit sound.
Stand is simple and quick to use, because it uses a rubbery material that simply clings to most (but not all) material (I have tried on wood and formica top desks, table cloth, papers on top of a desk (not as good, but works), glass top tables, and wood and ceramic floors). The only time this failed was when I had it on the side of some rubbermaid containers... slipped on that slicker, dustier surface). You can get a nearly straight up position fairly readily, the only real issue is with a low angle such some people like for typing on a tablet. If the surface isn't ideal, the tablet will simply slip down to the table (flat), when you try to type. The benefit is that you have just about every other angle (degree) that you might want to have. That is great if your trying to avoid a glare on the screen, for instance.
Tidak ada komentar:
Posting Komentar