TP-LINK TL-WR1043ND V2 Wireless N300 Gigabit Router, 300Mbps, USB port for Storage, 3 Detachable Antennas, Speed Boost up to 450Mbps, WPS Button..
GET TP-LINK TL-WR1043ND V2 Wireless N300 Gigabit Router, 300Mbps, USB port for Storage, 3 Detachable Antennas, Speed Boost up to 450Mbps, WPS Button By TP-Link
Most helpful customer reviews
252 of 266 people found the following review helpful.
Don't toss your old router! ... and other suggestions
By L. Brown
Some suggestions:
(1) Use the instructions in the Users Guide for installing the router - the installation software on the CD didn't work for me, but the written instructions are clear enough.
(2) Update the firmware before you get too far in configuring the router.
There was a nasty bug in the installed firmware that caused the router to freeze if you tried to display wireless statistics. This is fixed in the firmware dated August, 2010.
(2) If you're thinking of replacing an old b/g wireless router with this, don't toss the old router yet!
Many wireless devices such as printers and music systems (like Sonos) do not support the 11n standard yet. At first I tried running the TP-Link router in mixed b/g/n mode. For some reason the performance was exceptionally slow. But, it's easy to link your old router into the network so that the b/g devices will use the old router. The TP-Link router can then be set to 11n-only for excellent performance for devices that support it. Here's how to do it:
- Give each router a different IP address, say 192.168.1.1 and 192.168.1.2. Make sure both are outside the range of dynamic IP addresses.
- Give both routers the same SSID so that they will form a single network.
- Assign each router to different wireless channels. (1 or 6 or 11 are usually recommended).
- Turn off DHCP or other WAN support in the b/g router. Set up the TP-Link with WAN support (such as DHCP) and connect to the ADSL or cable modem.
- In the b/g router, add the MAC addresses of the 11n devices to its MAC filter list. These are devices you DON'T want to connect to it.
(Of course, if you have many more 11n devices than b/g ones, do the reverse: create a filter list with only the devices you DO want to connect).
- Link the b/g router to any LAN port on the TP-Link router with an Ethernet cable.
That should be it. Enjoy!
237 of 257 people found the following review helpful.Awesome Router for DD-WRT
By Tex
**************************
THIS REVIEW WAS FOR THE OLDER VERSION OF THE TP-LINK ROUTER.
**************************
I bought two of these routers with the intention of flashing them with DD-WRT. Both flashed extremely fast and easily without any hitches and can be flashed via the router's web GUI (no Telnet, etc). Both routers have been running non stop ever since flashing them and have worked perfectly. I have been very pleased thus far with TP-Link products, especially after having a lot of issues with Belkin routers (hangs, slooooow response, rebooting, over-heating, etc). You can't beat the price vs features with this TL-WR1043ND (for sure when using DD-WRT, but even the original TP-Link firmware is still very usable). I my opinion this is the best price vs features gigabit router on the market for DD-WRT.
For those interested, here are some hardware specs:
Platform...........Atheros AR9132 @ 400 MHz
FCC ID.............TE7WR1043NX
Wireless NIC...Atheros AR9103 3x3 MIMO
WLAN..............802.11b/g/n
LAN.................4/gigabit
WAN................1/gigabit
RAM.................32 MB
Flash...............8 MB
Serial Port.......1 (internal)
JTAG...............1 (internal)
USB.................1 (external)
Input Voltage...12V 1.5A
33 of 36 people found the following review helpful.Excellent WIFI Router
By Dr. Wilfredo M. Viray
I bought this wireless router because of the features and the reviews. It is a good thing I did. This is an excellent router.
Pros:
Ease of Setup - I got this working in less than 10 minutes. Just turn off your Cable modem and computer. Connect the router to the modem using the included cable. Power up everything. Then put in the CD and in a few minutes you are done. That includes setting up the WPA2 security.
Range - My previous Wireless Routers(Apple,Linksys,Zyxel) could only give me at most 61% from one end of my house to the other. This gives me 85%. That is going through 3 Bedrooms and furniture.
Speed - I used to get 12 Mbps with my previous router. I just tested it now and I now have 19.89 Mbps download speed from the same site I always test with.
Price - Excellent value for money.
Network USB Hardrive - You can easily share a USB hard drive. You now have no limit to how much videos you can download and games you can play. Share the drive with your entire family.
Cons:
Not Dual Band - It isn't dual band, but i don't need it so it does not bother me.
Summary:
This is a real find. Never heard of this company before, but I am very impressed with this product.
Tidak ada komentar:
Posting Komentar